• EPD
• NFPA 80 Standards 6.4.5 Protection Plates
• 6.4.5.1 Factory installed protection plates shall be installed in accordance with the listing of the door
• 6.4.5.2 Field installed protection plates shall be labeled and installed in accordance with their listing
• 6.4.5.3 Labeling shall not be required where the top of the protection plate is not more than 16" (406 mm) above the bottom of the door
• Meets ANSI A156.6 for J101 Metal Armor Plate, J102 Metal Kickplate, and J103 Metal Mop Plate

4 Beveled Edges

• US3, US4, DBZ, US19, US28, US32, US32D
• (US3 and US4 are unavailable above 24" tall)

Kickplate

Plates are sized on even inches. Odd sizes available and priced to next larger size.

Aluminum, Stainless Steel

• Furnish item number, height, width, and finish (i.e., 190S – 6" x 30", US32D)
• May be ordered with countersunk holes (specify "CSK") at extra charge

• UL listed for US19, US32, US32D, and DBZ with screw fasteners (must specify UL stamp) based on 48" maximum height by 46" maximum width
• Self-adhesive tape available on all plates
• Spanner head screws
• Torx head screws
• Round corners - specify 196R
• Wrap around side and bottom return
• 0.125" (3.18mm) material

Door Protection Plate