ANSI A51011B Grade 1 for 150-pound doors, UL, ADA

7/32" hinge side plus standard lockside clearance

Power Transfer Preparation (EPT 2) or (EPT 10)., Exposed Electric Switches (E1S)., Electric Through-Wire (ETW).

#10-24 x 5/8" S/S Dril-Kwik® (metal frame), #10-16 x 1-1/4" S/S Type AB (wood door)

US32D

79", 83-1/8", 85", 95", 119"

Standard and Custom

14 Ga. (0.075") Type 304 Stainless Steel

1-3/4"

300 lbs

• Any nonstandard length hinge may require a custom hole pattern based on the requested length. Consult Hager Companies to address the field prep for the doors and frames.
• Tamper resistant hospital tip available.
• Hager Companies 790 Series Stainless Steel Continuous Higes are approved for ANSI A156.26 Grade 1 for 150 lb doors and Grade 2 for 300 lb doors.

Lead lined hole pattern, Tamper Resistant Hospital Tips (HT), Sheared leaf, Raised Barrel (SWAGED), Wide Throw, Security Studs, Dutch Door Prep (DUTCH)

Concealed Leaf, 1/16" Inset, Door of Any Material

1/4" (6.3 mm) diameter Stainless Steel Pin. Dual 6/6 Nylon bearings between each knuckle. Door edge protection lip (stop side only). Not recommended for doors with a beveled edge on the hinge side. 1/16" (1.6 mm) inset.